pub struct ZwpTabletToolV2 { /* private fields */ }
Expand description

a physical tablet tool

An object that represents a physical tool that has been, or is currently in use with a tablet in this seat. Each wp_tablet_tool object stays valid until the client destroys it; the compositor reuses the wp_tablet_tool object to indicate that the object’s respective physical tool has come into proximity of a tablet again.

A wp_tablet_tool object’s relation to a physical tool depends on the tablet’s ability to report serial numbers. If the tablet supports this capability, then the object represents a specific physical tool and can be identified even when used on multiple tablets.

A tablet tool has a number of static characteristics, e.g. tool type, hardware_serial and capabilities. These capabilities are sent in an event sequence after the wp_tablet_seat.tool_added event before any actual events from this tool. This initial event sequence is terminated by a wp_tablet_tool.done event.

Tablet tool events are grouped by wp_tablet_tool.frame events. Any events received before a wp_tablet_tool.frame event should be considered part of the same hardware state change.

See also the Event enum for this interface.

Implementations§

source§

impl ZwpTabletToolV2

source

pub fn set_cursor( &self, serial: u32, surface: Option<&WlSurface>, hotspot_x: i32, hotspot_y: i32 )

set the tablet tool’s surface

Sets the surface of the cursor used for this tool on the given tablet. This request only takes effect if the tool is in proximity of one of the requesting client’s surfaces or the surface parameter is the current pointer surface. If there was a previous surface set with this request it is replaced. If surface is NULL, the cursor image is hidden.

The parameters hotspot_x and hotspot_y define the position of the pointer surface relative to the pointer location. Its top-left corner is always at (x, y) - (hotspot_x, hotspot_y), where (x, y) are the coordinates of the pointer location, in surface-local coordinates.

On surface.attach requests to the pointer surface, hotspot_x and hotspot_y are decremented by the x and y parameters passed to the request. Attach must be confirmed by wl_surface.commit as usual.

The hotspot can also be updated by passing the currently set pointer surface to this request with new values for hotspot_x and hotspot_y.

The current and pending input regions of the wl_surface are cleared, and wl_surface.set_input_region is ignored until the wl_surface is no longer used as the cursor. When the use as a cursor ends, the current and pending input regions become undefined, and the wl_surface is unmapped.

This request gives the surface the role of a wp_tablet_tool cursor. A surface may only ever be used as the cursor surface for one wp_tablet_tool. If the surface already has another role or has previously been used as cursor surface for a different tool, a protocol error is raised.

source

pub fn destroy(&self)

destroy the tool object

This destroys the client’s resource for this tool object.

Trait Implementations§

source§

impl Borrow<ObjectId> for ZwpTabletToolV2

source§

fn borrow(&self) -> &ObjectId

Immutably borrows from an owned value. Read more
source§

impl Clone for ZwpTabletToolV2

source§

fn clone(&self) -> ZwpTabletToolV2

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ZwpTabletToolV2

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Hash for ZwpTabletToolV2

source§

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl PartialEq<Weak<ZwpTabletToolV2>> for ZwpTabletToolV2

source§

fn eq(&self, other: &Weak<ZwpTabletToolV2>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq for ZwpTabletToolV2

source§

fn eq(&self, other: &ZwpTabletToolV2) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl Proxy for ZwpTabletToolV2

§

type Request<'request> = Request<'request>

The request enum for this interface
§

type Event = Event

The event enum for this interface
source§

fn interface() -> &'static Interface

The interface description
source§

fn id(&self) -> ObjectId

The ID of this object
source§

fn version(&self) -> u32

The version of this object
source§

fn data<U: Send + Sync + 'static>(&self) -> Option<&U>

Access the user-data associated with this object
source§

fn object_data(&self) -> Option<&Arc<dyn ObjectData>>

Access the raw data associated with this object. Read more
source§

fn backend(&self) -> &WeakBackend

Access the backend associated with this object
source§

fn send_request(&self, req: Self::Request<'_>) -> Result<(), InvalidId>

Send a request for this object. Read more
source§

fn send_constructor<I: Proxy>( &self, req: Self::Request<'_>, data: Arc<dyn ObjectData> ) -> Result<I, InvalidId>

Send a request for this object that creates another object. Read more
source§

fn from_id(conn: &Connection, id: ObjectId) -> Result<Self, InvalidId>

Create an object proxy from its ID Read more
source§

fn inert(backend: WeakBackend) -> Self

Create an inert object proxy Read more
source§

fn parse_event( conn: &Connection, msg: Message<ObjectId, OwnedFd> ) -> Result<(Self, Self::Event), DispatchError>

Parse a event for this object Read more
source§

fn write_request<'a>( &self, conn: &Connection, msg: Self::Request<'a> ) -> Result<(Message<ObjectId, BorrowedFd<'a>>, Option<(&'static Interface, u32)>), InvalidId>

Serialize a request for this object Read more
source§

fn is_alive(&self) -> bool

Checks if the Wayland object associated with this proxy is still alive
source§

fn downgrade(&self) -> Weak<Self>

Creates a weak handle to this object Read more
source§

impl Eq for ZwpTabletToolV2

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.