Struct wayland_protocols::xdg::xdg_output::zv1::server::zxdg_output_v1::ZxdgOutputV1

pub struct ZxdgOutputV1 { /* private fields */ }

compositor logical output region

An xdg_output describes part of the compositor geometry.

This typically corresponds to a monitor that displays part of the compositor space.

For objects version 3 onwards, after all xdg_output properties have been sent (when the object is created and when properties are updated), a wl_output.done event is sent. This allows changes to the output properties to be seen as atomic, even if they happen via multiple events.

See also the Request enum for this interface.

Implementations

impl ZxdgOutputV1

pub fn logical_position(&self, x: i32, y: i32)

position of the output within the global compositor space

The position event describes the location of the wl_output within the global compositor space.

The logical_position event is sent after creating an xdg_output (see xdg_output_manager.get_xdg_output) and whenever the location of the output changes within the global compositor space.

pub fn logical_size(&self, width: i32, height: i32)

size of the output in the global compositor space

The logical_size event describes the size of the output in the global compositor space.

Most regular Wayland clients should not pay attention to the logical size and would rather rely on xdg_shell interfaces.

Some clients such as Xwayland, however, need this to configure their surfaces in the global compositor space as the compositor may apply a different scale from what is advertised by the output scaling property (to achieve fractional scaling, for example).

For example, for a wl_output mode 3840×2160 and a scale factor 2:

• A compositor not scaling the monitor viewport in its compositing space will advertise a logical size of 3840×2160,

• A compositor scaling the monitor viewport with scale factor 2 will advertise a logical size of 1920×1080,

• A compositor scaling the monitor viewport using a fractional scale of 1.5 will advertise a logical size of 2560×1440.

For example, for a wl_output mode 1920×1080 and a 90 degree rotation, the compositor will advertise a logical size of 1080x1920.

The logical_size event is sent after creating an xdg_output (see xdg_output_manager.get_xdg_output) and whenever the logical size of the output changes, either as a result of a change in the applied scale or because of a change in the corresponding output mode(see wl_output.mode) or transform (see wl_output.transform).

pub fn done(&self)

all information about the output have been sent

This event is sent after all other properties of an xdg_output have been sent.

This allows changes to the xdg_output properties to be seen as atomic, even if they happen via multiple events.

For objects version 3 onwards, this event is deprecated. Compositors are not required to send it anymore and must send wl_output.done instead.

pub fn name(&self, name: String)

name of this output

Many compositors will assign names to their outputs, show them to the user, allow them to be configured by name, etc. The client may wish to know this name as well to offer the user similar behaviors.

The naming convention is compositor defined, but limited to alphanumeric characters and dashes (-). Each name is unique among all wl_output globals, but if a wl_output global is destroyed the same name may be reused later. The names will also remain consistent across sessions with the same hardware and software configuration.

Examples of names include ‘HDMI-A-1’, ‘WL-1’, ‘X11-1’, etc. However, do not assume that the name is a reflection of an underlying DRM connector, X11 connection, etc.

The name event is sent after creating an xdg_output (see xdg_output_manager.get_xdg_output). This event is only sent once per xdg_output, and the name does not change over the lifetime of the wl_output global.

This event is deprecated, instead clients should use wl_output.name. Compositors must still support this event.

pub fn description(&self, description: String)

human-readable description of this output

Many compositors can produce human-readable descriptions of their outputs. The client may wish to know this description as well, to communicate the user for various purposes.

The description is a UTF-8 string with no convention defined for its contents. Examples might include ‘Foocorp 11“ Display’ or ‘Virtual X11 output via :1’.

The description event is sent after creating an xdg_output (see xdg_output_manager.get_xdg_output) and whenever the description changes. The description is optional, and may not be sent at all.

For objects of version 2 and lower, this event is only sent once per xdg_output, and the description does not change over the lifetime of the wl_output global.

This event is deprecated, instead clients should use wl_output.description. Compositors must still support this event.

Trait Implementations

impl Borrow<ObjectId> for ZxdgOutputV1

fn borrow(&self) -> &ObjectId

Immutably borrows from an owned value.

impl Clone for ZxdgOutputV1

fn clone(&self) -> ZxdgOutputV1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ZxdgOutputV1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Hash for ZxdgOutputV1

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq<Weak<ZxdgOutputV1>> for ZxdgOutputV1

fn eq(&self, other: &Weak<ZxdgOutputV1>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for ZxdgOutputV1

fn eq(&self, other: &ZxdgOutputV1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Resource for ZxdgOutputV1

type Request = Request

The request enum for this interface

type Event<'event> = Event<'event>

The event enum for this interface

fn interface() -> &'static Interface

The interface description

fn id(&self) -> ObjectId

The ID of this object

fn version(&self) -> u32

The version of this object

fn data<U: 'static>(&self) -> Option<&U>

Access the user-data associated with this object

fn object_data(&self) -> Option<&Arc<dyn Any + Send + Sync>>

Access the raw data associated with this object.

fn handle(&self) -> &WeakHandle

Access the backend handle associated with this object

fn from_id(conn: &DisplayHandle, id: ObjectId) -> Result<Self, InvalidId>

Create an object resource from its ID

fn send_event(&self, evt: Self::Event<'_>) -> Result<(), InvalidId>

Send an event to this object

fn parse_request( conn: &DisplayHandle, msg: Message<ObjectId, OwnedFd>, ) -> Result<(Self, Self::Request), DispatchError>

Parse a event for this object

fn write_event<'a>( &self, conn: &DisplayHandle, msg: Self::Event<'a>, ) -> Result<Message<ObjectId, BorrowedFd<'a>>, InvalidId>

Serialize an event for this object

fn client(&self) -> Option<Client>

The client owning this object

fn is_alive(&self) -> bool

Checks if the Wayland object associated with this proxy is still alive

fn post_error(&self, code: impl Into<u32>, error: impl Into<String>)

Trigger a protocol error on this object

fn downgrade(&self) -> Weak<Self>

Creates a weak handle to this object

impl Eq for ZxdgOutputV1