pub struct ZwpRelativePointerV1 { /* private fields */ }
Expand description

relative pointer object

A wp_relative_pointer object is an extension to the wl_pointer interface used for emitting relative pointer events. It shares the same focus as wl_pointer objects of the same seat and will only emit events when it has focus.

See also the Request enum for this interface.

Implementations§

source§

impl ZwpRelativePointerV1

source

pub fn relative_motion( &self, utime_hi: u32, utime_lo: u32, dx: f64, dy: f64, dx_unaccel: f64, dy_unaccel: f64, )

relative pointer motion

Relative x/y pointer motion from the pointer of the seat associated with this object.

A relative motion is in the same dimension as regular wl_pointer motion events, except they do not represent an absolute position. For example, moving a pointer from (x, y) to (x’, y’) would have the equivalent relative motion (x’ - x, y’ - y). If a pointer motion caused the absolute pointer position to be clipped by for example the edge of the monitor, the relative motion is unaffected by the clipping and will represent the unclipped motion.

This event also contains non-accelerated motion deltas. The non-accelerated delta is, when applicable, the regular pointer motion delta as it was before having applied motion acceleration and other transformations such as normalization.

Note that the non-accelerated delta does not represent ‘raw’ events as they were read from some device. Pointer motion acceleration is device- and configuration-specific and non-accelerated deltas and accelerated deltas may have the same value on some devices.

Relative motions are not coupled to wl_pointer.motion events, and can be sent in combination with such events, but also independently. There may also be scenarios where wl_pointer.motion is sent, but there is no relative motion. The order of an absolute and relative motion event originating from the same physical motion is not guaranteed.

If the client needs button events or focus state, it can receive them from a wl_pointer object of the same seat that the wp_relative_pointer object is associated with.

Trait Implementations§

source§

impl Borrow<ObjectId> for ZwpRelativePointerV1

source§

fn borrow(&self) -> &ObjectId

Immutably borrows from an owned value. Read more
source§

impl Clone for ZwpRelativePointerV1

source§

fn clone(&self) -> ZwpRelativePointerV1

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ZwpRelativePointerV1

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Hash for ZwpRelativePointerV1

source§

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl PartialEq<Weak<ZwpRelativePointerV1>> for ZwpRelativePointerV1

source§

fn eq(&self, other: &Weak<ZwpRelativePointerV1>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq for ZwpRelativePointerV1

source§

fn eq(&self, other: &ZwpRelativePointerV1) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl Resource for ZwpRelativePointerV1

source§

type Request = Request

The request enum for this interface
source§

type Event<'event> = Event<'event>

The event enum for this interface
source§

fn interface() -> &'static Interface

The interface description
source§

fn id(&self) -> ObjectId

The ID of this object
source§

fn version(&self) -> u32

The version of this object
source§

fn data<U: 'static>(&self) -> Option<&U>

Access the user-data associated with this object
source§

fn object_data(&self) -> Option<&Arc<dyn Any + Send + Sync>>

Access the raw data associated with this object. Read more
source§

fn handle(&self) -> &WeakHandle

Access the backend handle associated with this object
source§

fn from_id(conn: &DisplayHandle, id: ObjectId) -> Result<Self, InvalidId>

Create an object resource from its ID Read more
source§

fn send_event(&self, evt: Self::Event<'_>) -> Result<(), InvalidId>

Send an event to this object
source§

fn parse_request( conn: &DisplayHandle, msg: Message<ObjectId, OwnedFd>, ) -> Result<(Self, Self::Request), DispatchError>

Parse a event for this object Read more
source§

fn write_event<'a>( &self, conn: &DisplayHandle, msg: Self::Event<'a>, ) -> Result<Message<ObjectId, BorrowedFd<'a>>, InvalidId>

Serialize an event for this object Read more
source§

fn client(&self) -> Option<Client>

The client owning this object Read more
source§

fn is_alive(&self) -> bool

Checks if the Wayland object associated with this proxy is still alive
source§

fn post_error(&self, code: impl Into<u32>, error: impl Into<String>)

Trigger a protocol error on this object Read more
source§

fn downgrade(&self) -> Weak<Self>

Creates a weak handle to this object Read more
source§

impl Eq for ZwpRelativePointerV1

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.